PIM Analysers for TETRA and 380-470 MHz Band (UHF)
Production testing requires fast and highly reliable PIM analysers. As the spectrum of manufactured products widens, PIM analysis may have to be performed on additional frequencies. Our Expandable PIM Analyzer is can be equipped with one to four different RF Units. Expandable PIM Analyzer for Manufacturing and Laboratory. AWT’s PIM S1L TETRA and UHF analysers are important for analysing telecommunication infrastructure like antennas, cables and components. These very accurate PIM analysers come with a wealth of standard features and measurement capabilities.
Features
- Test Modes: Field Mode, Analyzer, multi PIM display, Rx sweep, PIM vs. Time, Single Carrier for Insertion Loss (IL) measurements.
- Embedded DTP option: Distance-to-PIM, VSWR, DTF
- High PIM sensitivity: -163 dBc @ 2x 43 dBm carriers.
- Data recording: CSV, PDF, BMP screen shots.
- Output power adjustable 2x 15dBm to 44dBm.
- Large 10.2″ Touch Screen Display.
- Convenient One-Body-Solution
Low PIM components and installations are particularly important for highest network capacity and reliable transmission. Signal degradation caused by PIM effects reduces data capacity and can lead to interrupted and even dropped calls.
PIM S1L
PIM S1L TETRA & UHF analyzers ideal for component testing in laboratory and quality assurance, but are also valuable field tools, providing vital test results in TETRA & UHF networks. Specifications and measurement accuracy are exceptional and of PIM S1L analyzers deliver reliable results. They are very easy to operate; just the touch of a button to start predefined tests.
Our PIM S1L analyzers deliver constant CW Power signals during PIM measurements. This makes them fully conform to PIM specification IEC 62037, the standard for PIM testing. PIM S1L analyzers offer variable measurement signal output power from 15 dBm to 44 dBm. They provide even a Single-Carrier-Mode, ideal for Insertion Loss and coverage measurements.
Market leading dynamic range and low receiver noise level makes these analyzers perfect for testing, pinpointing and eliminating PIM. Results can be stored as PDF, BMP screen shots, or as CSV files. Our patented DTP measurement is highly accurate, and immediately available just at the push of a button.
“When public safety officers assign their staff to critical missions, they rely on the performance of their TETRA & UHF networks. Communication and data transmission must not experience any PIM distortion. PIM S1L MK2 TETRA & UHF helps to establish highest quality networks”.
| Order Number | Technologies / Type | Tx Frequency (MHz) | Rx Frequency (MHz) |
|---|---|---|---|
| PS1L400 MK2 | TETRA | 390 – 400 | 380 – 385 |
| PS1L400E MK2 | E-TETRA | 420 – 430 | 410 – 412 |
| PS1L385 MK2 | TETRA 385 | 385 – 400 | 410 – 425 |
| PS1L450 | LTE 450 Band 31 | 460 – 470 | 450 – 455 |
| PS1L465 | LTE 450 MHz – UL /DL – frequencies only | 462.5 – 467.5 | 452.5 – 457.5 |
| PS1L-XXX | various | Contact factory for other frequency combinations. | |
| Options & Accessories | |
|---|---|
| Model Number | Description |
| POPT1 | DTP (Distance to PIM) /VSWR / DTF (Distance to FAULT) Option |
| PACC2L | Accessory Kit: (1) low PIM cable 3m / 10ft, low PIM 100W (380-2800 MHz), (4) adapters, torque wrench with hard carry case |
| PIMGEN | PIM Source: Generator with preset PIM value of -80dBm (+/-10). Quick indication of system functionality. Ideal for test and training. |
| PLOAD100L | PIM Load 100W, PIM: < -163 dBc @ 2x43dBm, 380-2800 MHz, DIN 7/16(f) |
| PLOAD50L | PIM Load: 50W/ 10 W (25 mins / permanent), PIM: < -163 dBc @ 2x43dBm, 380-2800 MHz, DIN7/16 (f) – DIN 7/16 (m) |
| ADA-DMDF | Low PIM Adapter, PIM <-165dBc @ 2x43dBm, DIN(m) / DIN(f), Connector Saver |
| LIC308-DMDM-3M | Low PIM CABLE 3M (10 ft), PIM-165 dBc @ 2x43dBm, DIN(M) – DIN(M), metal protection collars |
| LIC308-DMDM-1M | Low PIM CABLE 1M (3 ft), PIM-165 dBc @ 2x43dBm, DIN(M) – DIN(M), metal protection collars |
| Transmitter | |
|---|---|
| Carrier Power | +15 to +44 dBm |
| Power Accuracy | +/- 0.35 dB |
| Frequency Accuracy | 2 ppm |
| Reverse Pwr. Protection | +43 dBm for 5 sec |
| Receiver | |
|---|---|
| Reverse IM @ 2x43dBm | -120 dBm / -163 dBc typ. |
| Noise Floor | -132 dBm (@300Hz) |
| Dynamic Range (typical) | > 80 dB |
| Reverse Power Protection | +43 dBm for 5 sec |
| Max Input Power | 0 dBm |
| Measurement Accuracy | +/- 1.0 dB (typ.) |
| Distance to PIM / Distance to VSWR (Option) | |
|---|---|
| DTP Accuracy | 1 m typ. |
| DTF Accuracy (VSWR) | 1 m |
| Cable Types | Built-in list of cables, Editing and adding new cable types (Attenuation, Velocity) |
| Dimensions / Weight / Environment / Electrical | |
|---|---|
| Dimensions | 504 x 398 x 276 (mm) 19.8 x 15.7 x 10.9 (inch) |
| Weight (* standard / with POPT1) | 28.5 kg (62.6 lb) / 30.5 kg (67.0 lb) |
| Temperature | 0 °C to +40 °C |
| Humidity | 85 %, RH (non condensing) |
| Protection | IP20 |
| AC Power | 100 to 240V 50/60 Hz |
| Power Consumption | 750 VA |
Related Products
Support at Every Step
We provide support, services, comprehensive training and the resources you need. It’s all part of what we do to maximise the value of your VICOM investment.
Services
Value-add services that complement your VICOM system solution and instrument portfolio to provide a total cost of ownership.
Customer Care
Customer service that provides Return Material Authorisation (RMA) for repair and calibration.
Training
Technical education solutions, product training, and blended learning for technicians who are using new products or working with existing tools
Technical Assistance
Technical Assistance Center to assist you in using/configuring products or address issues regarding product performance
How to get started
Interested in a product demonstration? Contact us for more info, receive a price quote, or find out how to buy.
Contact Sales Expert
Request a Quote
