Logo
Select Page

2 Series Mixed Signal Oscilloscope

Unlock more space on your bench without compromising performance. At only 1.5 inches thick and less than 4 pounds, the 2 Series MSO is a full-featured, realtime touchscreen oscilloscope in a compact, portable form factor that feels like a tablet. On the benchtop, in the classroom, or to the field, take it wherever your measurement challenges take you.

Portable handheld oscilloscope for daily debug and test

For those seeking the convenience of a portable oscilloscope, the 2 Series MSO delivers unmatched performance. It's small enough to fit into a laptop bag but offers robust specifications, including bandwidths up to 500 MHz and a maximum sample rate of 2.5 GS/s, with options for 2 or 4 analog channels. The front and side I/O ports provide easy access and connectivity. Additionally, the optional detachable battery pack offers versatility for bench or field use.

Simple touchscreen interface and controls

The 2 Series MSO offers the same award-winning touchscreen user interface and simplified control panel you’ve come to expect on the most advanced Tektronix oscilloscopes.

  • Simplified front panel with only the most critical controls
  • Colored LED ring lights around the knobs indicate active sources or parameters to adjust
  • Colored LED light under buttons indicate status

Comprehensive debug with one instrument

With several integrated options, the 2 Series MSO is equipped for all your debugging needs in just one instrument.

  • Built-in 16 MSO channels for testing digital circuits (2-MSO instrument option)
  • Analyse the frequency response of a system with the built-in Bode plot feature (2-SOURCE software option)
  • 50 MHz AFG, 4-bit pattern generator for simulating the circuit under test (2-SOURCE software option)
  • Supports a variety of probes to capture a wide range of signal

Comprehensive Analysis for Fast Insight

A full suite of analysis tools provides immediate access to instrument configuration or waveform management tasks with a single tap.

  • Waveform and screen-based cursors with user-selectable readout location
  • Unlimited automated measurements
  • Basic and advanced waveform math including arbitrary equation editing
  • FFT for spectrum analysis 

Optional accessories add versatility

  • Two-slot battery pack supports up to eight hours of battery life and can be hot swapped in the field
  • Rack mount kit attaches easily to VESA mount and allows access to all instrument ports
  • Optional protective case safeguards instrument from drops up to 40 inches and includes kickstand and carrying bag
  • Compatible with many off-the-shelf VESA accessories, including a rolling cart, cup holder mount, desk arm mount, and more

Analyse, share, collaborate with oscilloscope software

Capture data outside the lab, classroom, or any location and collaborate easily with colleagues on the next bench or in the next time-zone.

  • Built-in VNC server to control instrument from devices such as PC, tablet, or phone
  • TekDrive cloud storage facilitates record-keeping and collaboration
  • Analyze data on or off the scope with TekScope™ PC analysis software that works just like the scope
  • TekScope and TekDrive offered for six months free
  • Kickstart Software enables multi-instrument control, data collection and analysis
  • Automate testing with our Python Driver Package

Product Specifications
Model Analog Bandwidth Analog Channels Digital Channels Sample Rate Record Length
MSO24-EDU 70 MHz – 200 MHz 4 16 Up to 2.5 GS/s 10 M
MSO22-EDU 70 MHz – 200 MHz 2 16 Up to 2.5 GS/s 10 M
MSO22 70 MHz – 500 MHz 2 16 Up to 2.5 GS/s 10 M
MSO24 70 MHz – 500 MHz 4 16 Up to 2.5 GS/s 10 M
Product Specifications
Tektronix 2 Series MSO Keysight 2000 X-Series Rohde & Schwarz RTB2000
Channels 2 or 4 2 or 4 2 or 4
Bandwidth 70, 100, 200, 350, 500 MHz 70, 100, 200 MHz 70, 100, 200, 300 MHz
Sample Rate 1.25 GS/s (all channels on)
2.5 GS/s (half channels on)
1 GS/s (all channels on)
2 GS/s (half channels on)
1.25 GS/s (all channels on)
2.5 GS/s (half channels on)
Max Record Length 10 M points 1 M points 10 M points
Max Input Voltage CAT I 300 Vrms
CAT II 300 Vrms
135 Vrms, CAT Rating N/A 300 Vrms, CAT Rating N/A
Trigger Types Edge, Pulse Width, Runt, Timeout, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus Edge, Edge then Edge, Pulse, Width, Pattern, Video, Runt, Rise/Fall Time, Nth Edge Burst edge, width, video, pattern, runt, rise time, fall time, serial bus, timeout, line
Arbitrary Function Generator 1-channel, 50 MHz 1-channel, 20 MHz 1-channel, 25 MHz
MSO 16-channel 8-channel 16-channel
Protocol Decode I²C, SPI, RS232/422/485/UART, CAN, CAN FD, CAN XL, LIN, SENT, 10Base-T1S I²C, SPI, RS232/422/485/UART, CAN, LIN I²C, SPI, RS232/422/485/UART, CAN, LIN
Display 10 inch, WXGA, Capacitive Touch 8.5 inch, WVGA, Non Touch 10 inch, WXGA, Capacitive Touch
Battery 2 Batteries 8 hours, hot swap N/A N/A
VESA Mount 100mm x 100mm N/A N/A

Embedded Design

Embedded designs have never been faster, more complex, and connected so their measurement technology must be on the same wavelength. Engineers need tools that can validate, test and design with speed and accuracy.

  • Power supply sequence and measurement
  • Serial protocol triggering and analysis for I2C, SPI, RS-232/422/485/UART, CAN, CAN FD, CAN XL, LIN, and SENT
  • Device characterization
  • Data sharing and remote collaboration
  • Control signal capture and analysis with 16 digital channels

Education

Designed with new users and hybrid learning environments in mind, the 2 Series MSO, is the perfect instrument for teaching the next generation of engineers.

  • Menus with graphical images and explanatory text for quick feature overviews
  • Integrated help system promotes self learning/discovery
  • Software enabled for remote teaching, sharing, and learning
  • Ability to independently disable autoset, cursors, and measurements.

The EDU models are priced exclusively for educational institutions and available with an extended 5-year Total Protection. They include serial communication analysis, arbitrary function generator, digital pattern generator, and FRA (Bode plot) capabilities.

Automotive

The modern automotive industry moves quickly, and these engineers and technicians need the right oscilloscope at their fingertips to identify issues quickly and easily. The 2 Series MSO combines bench-level performance in a portal scope to help unlock new user experiences and make field debug accessible, precise and repeatable.  

  • In-vehicle or in-field testing with optional battery pack
  • Designing / debugging electronic control units (ECUs)
  • Vehicle sensor test and debug
  • SENT sensor bus troubleshooting
  • Controller Area Network (CAN) bus troubleshooting
  • Local Interconnect Network (LIN) bus troubleshooting
  • Automotive Ethernet 10Base-T1S bus troubleshooting

Manufacturing

Streamline your manufacturing process by seamlessly transitioning from design to testing on the production floor with the unmatched versatility of the 2 Series MSO oscilloscope. 

  • Limit and mask testing based on golden reference signal
  • Board rework and trouble shooting
  • Failure analysis
  • Automated test


Related Products



Support at Every Step


We provide support, services, comprehensive training and the resources you need. It’s all part of what we do to maximise the value of your VICOM investment.

Services

Value-add services that complement your VICOM system solution and instrument portfolio to provide a total cost of ownership.

Customer Care

Customer service that provides Return Material Authorisation (RMA) for repair and calibration.

Training

Technical education solutions, product training, and blended learning for technicians who are using new products or working with existing tools

Technical Assistance

Technical Assistance Center to assist you in using/configuring products or address issues regarding product performance


How to get started


Interested in a product demonstration? Contact us for more info, receive a price quote, or find out how to buy.

Contact Sales Expert

Request a Quote

Request a Demo